All Open Positions

We are currently looking for an Engineer in either our Dallas, Houston or Austin office. This individual will be responsible for: 

• Performing structural computations in the design and analysis of concrete, steel or other miscellaneous structures
• Creating analysis models and interpreting results for 2D and 3D structural frames
• Assisting with construction administrative tasks, including site visits and shop drawing review
• Understanding load paths for gravity and lateral loads and calculating applicable loads based on appropriate building codes
• Assisting with design drawings, quantities, cost estimates, specifications, reports and other project deliverables while working with the structures team
• Preparing technical studies and reports            

We are currently looking for a Graduate Engineer in our Houston, Dallas or Austin office.  This individual will be responsible for: 

• Performing structural computations in the design and analysis of concrete, steel or other miscellaneous structures
• Creating analysis models and interpreting results for 2D and 3D structural frames
• Assisting with construction administrative tasks, including site visits and shop drawing review
• Understanding load paths for gravity and lateral loads and calculating applicable loads based on appropriate building codes
• Assisting with design drawings, quantities, cost estimates, specifications, reports and other project deliverables while working with the structures team
• Preparing technical studies and reports            

We are currently looking for Engineers in our Houston office locations.  You would be responsible for: 

• Performing structural computations in the design and analysis of concrete, steel or other miscellaneous structures
• Creating analysis models and interpreting results for 2D and 3D structural frames
• Assisting with construction administrative tasks, including site visits and shop drawing review
• Understanding load paths for gravity and lateral loads and calculating applicable loads based on appropriate building codes
• Assisting with design drawings, quantities, cost estimates, specifications, reports and other project deliverables while working with the structures team
• Preparing technical studies and reports            

Our Houston-based, Corporate Finance team is looking for a bright, energetic individual with the requisite skills to join the team as an Administrative Assistant. This is a full-time role ideal to someone who has previous experience supporting a team of Accountants.

We are seeking to hire a qualified Technical Designer with experience in model-based erection procedure deliverables for various structural systems, as well as fabrication-level (LOD400) detailing for structural steel, reinforced concrete, and light gauge steel structural systems. The role of Technical Designer in the Construction Engineering practice area is to develop Building Information Models (BIM), engineering elements, and structural systems specifically during construction phase portions of projects.  Position requires impeccable written and spoken communication skills with frequent interactions with architects, contractors, and owners. Other responsibilities include:

• Uses latest tools/digital workflows to efficiently create and maintain BIM information and to interoperate with analysis, documentation, fabrication, and construction models
• Performs clash detection against reference models and works with internal team to track and resolve clashes and conflicts
• Works with project team (architects, contractors, engineers, designers, and modelers) to plan and document project-specific digital implementation, including analysis, design, documentation, fabrication, and construction models
• Audits models after key milestones, and periodically checks model content for accuracy, consistency, and adherence to graphic and modeling standards
• Understands key building systems, their components, and typical layout/geometry/dimensions
• Learns detailing conventions for commonly encountered conditions and project-specific details
• Works towards understanding of constructability issues, especially with atypical conditions
• Maintain budgetary objectives of project
• Perform other functions as needed.

Walter P Moore seeks a well prepared Senior Engineer to join our firm’s Construction Engineering Services team, a specialized team within the Structures Group.  In this role, the senior engineer will work on projects for contractors, steel fabricators and erectors, and the like.  Primary roles supporting their Project Manager will include: leading junior engineers, analyzing and validating structures at different stages of construction, developing construction sequencing for complex structures, analysis and design of temporary structures to support construction, and steel connection design.  Candidates must have strong computer analysis skills and coursework covering a broad array of topics in steel design.

We seek well-prepared graduates of top civil and architectural engineering schools for entry-level positions in our Diagnostics Group’s Washington DC office.

Walter P Moore seeks a well prepared graduate from one of the top engineering schools to join our firm’s Construction Engineering Services team, a specialized team within the Structures Group.  In this role, the graduate engineer in the Construction Engineering Services team will work on projects for contractors, steel fabricators and erectors, and the like.  Primary roles supporting their Project Manager will include: analyzing and validating structures at different stages of construction, developing construction sequencing for complex structures, analysis and design of temporary structures to support construction, and steel connection design.  Candidates must have strong computer analysis skills and coursework covering a broad array of topics in steel design.

Walter P Moore has an immediate opening for a full-time or part-time Human Resources Intern to join our Human Resources team in our Downtown Houston office. In this position, you will learn about the different aspects of the employee life cycle and work on special projects.

Walter P Moore seeks a well prepared graduate from one of the top engineering schools to join our firm’s Construction Engineering Services team, a specialized team within the Structures Group.  In this role, the graduate engineer in the Construction Engineering Services team will work on projects for contractors, steel fabricators and erectors, and the like.  Primary roles supporting their Project Manager will include: analyzing and validating structures at different stages of construction, developing construction sequencing for complex structures, analysis and design of temporary structures to support construction, and steel connection design.  Candidates must have strong computer analysis skills and coursework covering a broad array of topics in steel design.

Walter P Moore has an immediate opening for a Project Manager to join our dynamic Structural Engineering group in our Downtown Houston office.  The qualified candidate will have at least 8-12 years of relevant experience working on design of office buildings, healthcare facilities, sports venues and other large commercial structures with construction costs of $25 million and up.  Project management experience is required.

Walter P Moore has an immediate opening for a Sr. Engineer to join their dynamic Structural Engineering team. The qualified candidate will between 4 - 8 years’ relevant experience working on design of office buildings, healthcare facilities, sports venues and other large commercial structures with construction costs of $25 million and up.  

In this position, the Team Director will lead a team of engineers and technicians designing and producing a variety of hydrology and hydraulics engineering projects. The qualified candidate should possess a high energy level and be a self-motivated engineer who can work within a strong team environment, serving clients on major projects throughout the United States and internationally.  Technical specialization, proactivity and aggressiveness when meeting client and project needs are pluses.

• Manage a group of engineers in the pursuit of water resources, drainage, hydrology and hydraulics design related projects and the related clients;
• Proficient understanding and knowledge of frequently used software such as HEC programs, XP-SWMM, MOUSE, etc. and how the use of each addresses water resources issues.
• Sound technical knowledge, especially in the area of water resources engineering.
• Good communication and organizational skills.
• Working knowledge and understanding of U.S. design codes and standards.
• Knowledge in the development of construction documents, plans & specifications.
• Working with the WRE team to identify and pursue water resources opportunities in which Walter P Moore can excel.
• Existing Client network a plus.

Our WPM Technology Team is currently seeking a highly skilled Senior IT Manager to join us. At WPM Technology, we tackle some of the most difficult obstacles in the AEC industry. Our comprehensive range of services includes IT managed services, consulting, cybersecurity, custom software development, and immersive digital project collaboration. We strive to deliver effective, dependable, and resilient technology solutions that enable your organization to operate with confidence. Our primary objective is to be a reliable partner to you in the rapidly changing digital landscape, positioning your business for exponential growth.

In this position, the Designer will work with a team of engineers for the pursuit, design and production of various civil engineering projects, including the following responsibilities:        

• Visualize engineering concepts and translate to design drawings.
• Prepare reports, exhibits, preliminary and final site development drawings, and plan & profiles from verbal instructions, notes, and other input material from supervising engineer.
• Use Civil 3D and Civil 3D supported analysis and modeling software to perform design tasks such as site layouts, site grading, site drainage and utilities, surface modeling and analysis, creation of alignments, creation of corridors, profiles, sections, and material take-offs for cost opinions.
• Assist supervising engineer in collection of project requirements and materials for project design and documentation.
• Able to apply basic engineering design principles, theories, and practices to complete assignments and manage multiple deadlines.
• May assist supervising engineer and management as a technical specialist and advisor to mentor and train graduate engineers, and cad technicians.
• Able to conform to company standards.
• Able to organize and maintain project related information per company’s requirements and standards.
• Other duties as assigned.

Additional position responsibilities will include: 

• Management of land/site development projects, including technical design, quality control, and project management.  
• Sound technical design background
• Excellent communication and organizational skills
• Thorough knowledge and understanding of U.S. design codes and standards
• Related local experience preferred.

In this role as a Technical Modeler, you will work closely with the structural engineering team.  Job tasks will include rapidly developing structural building information models (BIMs), annotating plan and details, creating three-dimensional renderings, rationalizing geometry for appropriate structural schemes, and assisting with creating structural narratives.  Position requires written and spoken communication skills with frequent interactions with clients, architects and contractors.  Our projects range vastly in scale, detail, and complexity, and this position requires being able to work on multiple projects at a time with engineers and modelers from multiple geographic locations.

• Management of land/site development projects, including technical design, quality control, and project management
• Sound Technical Design background
• Excellent communication and organizational Skills
• Project client interface
• Financial management of projects
• Working with the team to set goals to meet business objectives
• Assisting in the development of the engineering staff
• Thorough knowledge and understanding of U.S. design codes and standards
• Related local experience preferred

• Perform engineering calculations and cost estimates.
• Prepare drawings, layouts, and other engineering drafting.
• Assist in developing plans and reports.
• Assist in collecting data and research utility records.
• Help in design, production, and miscellaneous organizational work.

We are currently looking for the right individual to join our Public Works Group in the role of Senior Engineer.  This individual will possess a high energy level and be a self-motivated Manager / Client Server with the ability to grow the service line by providing high quality services. 

As a Business Information Architect, you will manage our corporate intranet (and related data) which we are currently re-branding as our internal Knowledge Management Platform.   The role can report to any of our 20 US offices.  We are responding to the current working situation as a hybrid company anticipating a portion of our workforce will remain remote after the pandemic work from home orders lift.  Communication with our C-Suite in our Houston office will be frequent.  This role will require you to put yourself in the position of the end user – your fellow Walter P Moore teammates, to develop solutions on how best to organize, present, and archive data for optimal efficiency and ease of use. You will largely be responsible for working in conjunction with the Intranet Governance Committee and the IT group to make our intranet the “go to” resource for information and collaboration.  

In this position the qualified individual will investigate and determine the service life of building enclosure assemblies. The qualified individual will assess enclosure systems, and design repairs for existing enclosure systems. They will perform enclosure review to assess air infiltration, rain water control, heat transfer, and vapor transmission. They will perform building performance analysis including evaluate daylighting, solar heat gain, thermal energy transfer, and holistic integration of the enclosure with building mechanical, lighting, and plumbing systems.A sound technical background and excellent oral and written communication skills are required. A technical background in CADD and building performance modeling software is preferred.  You'll develop a strong background in building façade and roofing assemblies, understanding of building science and thermal analysis concepts as well as a knowledge of modeling building performance and sustainability.Job Responsibilities will include:

• Assist Project Manager with project tasks
• Review and organize project-related documents
• Research building codes and industry standards
• Write assessment reports
• Perform field investigations, including non-destructive testing, travel required
• Performance modeling of enclosure assemblies using different software
• Analyze proposed repair/design options.
• Design and draft repair drawings and details
• Prepare construction documents such as repair drawings and specifications
• Observe construction and installation of repairs/designs in the field, including quality assurance testing
• Prepare site visit reports and meeting minutes
• Interact with project clients, sub-consultants, and repair contractors

In this position, the Director of Traffic and ITS Engineering will lead a team of engineers and technicians designing and producing a variety of traffic and ITS engineering projects. The responsibilities will include managing, assisting in analysis, design and implementation of projects such as traffic impact studies, traffic operations studies, capacity analysis, traffic signal design, ITS design, signal timing, signing, striping, lighting, and traffic control plans.

Position responsibilities include:

• Utilizing sound technical knowledge, especially in the areas of water resources engineering analysis and design
• Working with the Water Resources Engineering (WRE) team to identify and pursue water resources opportunities
• Potential to lead a team of engineers and technicians in the performance of H&H related projects
• Developing flood warning/flood forecasting into a target area of expertise for Walter P Moore’s WRE group
• Developing a national network of clients and consultant alliances to position the WRE group

In this position, the Senior Engineer/PM will work with a team of engineers and technicians designing and producing a variety of traffic engineering projects.  The responsibilities will include assisting in analysis, design and implementation of projects such as traffic impact studies, traffic operations studies, capacity analysis, traffic signal design, signal timing, signing, striping, lighting and traffic control plans.

Walter P Moore has an immediate opening for a Forensics Geotechnical Engineer/Project Manager to join our dynamic Diagnostics Group. Project Management experience is required for the PM designation.

The specific position responsibilities will include:

• Assisting with project management duties
• Participate on a team of engineers and drafters working on infrastructure projects
• Perform engineering calculations, designs, cost estimates, and specifications
• Engage in planning and public meetings
• Prepare and participate in client presentations
• Assist in developing plans and reports; and
• Mentor and direct entry-level engineers and drafters

Walter P Moore has an immediate opening for a Forensics MEP Engineer/Project Manager to join our dynamic Diagnostics Group. Project Management experience is required for the PM designation.

We are currently looking for the right individual to join our Diagnostics Group in the role of Drafter. This individual will be responsible for preparation of construction documents, technical reports, drawings, and details for structural, masonry, cladding, roofing, and building thermal envelope repair projects. A willingness to work in a team environment, following the standards we have in place is a must.  A “can-do”, customer-service attitude is crucial.

In this position the qualified individual will work with a team of engineers to provide engineering services on diagnostics related projects, including forensics, restoration, renovation and rehabilitation of commercial structures and complexes such as arenas, stadiums, convention centers, office and industrial facilities, condominiums, hospital complexes, and parking garages. Sound technical background and excellent oral and written communication skills are required.

We seek well prepared students of top engineering schools to expand their education in structural engineering through the internship program offered at Walter P Moore. As an engineering intern in our structural engineering group, you will participate on project teams for architectural projects of all types, including commercial, sports, healthcare, and public assembly buildings. You will also be eligible to participate in our in-house staff development program.

Walter P Moore has an immediate opening for a Quality Control Engineer to join their dynamic Structural Engineering team. Your primary responsibility will be to develop, implement, and oversee quality assurance and control processes to maintain the highest standards of excellence in our structural designs. The qualified candidate will have at least 12 years relevant experience in a structural engineering consulting role. The candidate will have experience working on design and delivery of office buildings, healthcare facilities, sports venues and other large commercial structures with construction costs of $25 million and up.

We are currently looking for an Senior Engineer in either our Dallas, Fort Worth, Houston or Austin office.  This individual will be responsible for: 

• Performing structural computations in the design and analysis of concrete, steel or other miscellaneous structures
• Creating analysis models and interpreting results for 2D and 3D structural frames
• Assisting with construction administrative tasks, including site visits and shop drawing review
• Understanding load paths for gravity and lateral loads and calculating applicable loads based on appropriate building codes
• Assisting with design drawings, quantities, cost estimates, specifications, reports and other project deliverables while working with the structures team
• Preparing technical studies and reports            

Walter P Moore has an immediate opening for an Engineer to join our dynamic Diagnostics Group. The qualified candidate will have relevant experience acquiring Structural Diagnostics business with either an industrial or commercial structure focus. Project Management experience is required.

In this position, the qualified individual will design repairs for existing enclosure systems. They will perform review of enclosure systems for new construction, renovation, and restoration projects. The qualified individual will investigate and determine the service life of building enclosure assemblies. They will perform enclosure review to assess air infiltration, rain water control, heat transfer, and vapor transmission. They will perform building performance analysis including evaluate day-lighting, solar heat gain, thermal energy transfer, and holistic integration of the enclosure with building mechanical, lighting, and plumbing systems.

As a Senior Desktop Support Analyst, qualified candidates will serve as Level 2 support for PC Help Desk issues. They will be charged with ensuring issues are solved the first time and in a timely manner by monitoring, analyzing, and evaluating the performance of Help Desk resources.

In this position the qualified individual will investigate and determine the service life of building enclosure assemblies. The qualified individual will assess enclosure systems, and design repairs for existing enclosure systems. They will perform enclosure review to assess air infiltration, rain water control, heat transfer, and vapor transmission. They will perform building performance analysis including evaluate daylighting, solar heat gain, thermal energy transfer, and holistic integration of the enclosure with building mechanical, lighting, and plumbing systems.A sound technical background and excellent oral and written communication skills are required. A technical background in CADD and building performance modeling software is preferred.  You'll develop a strong background in building façade and roofing assemblies, understanding of building science and thermal analysis concepts as well as a knowledge of modeling building performance and sustainability.Job Responsibilities will include:

• Assist Project Manager with project tasks
• Review and organize project-related documents
• Research building codes and industry standards
• Write assessment reports
• Perform field investigations, including non-destructive testing, travel required
• Performance modeling of enclosure assemblies using different software
• Analyze proposed repair/design options.
• Design and draft repair drawings and details
• Prepare construction documents such as repair drawings and specifications
• Observe construction and installation of repairs/designs in the field, including quality assurance testing
• Prepare site visit reports and meeting minutes
• Interact with project clients, sub-consultants, and repair contractors

This Desktop Support role is a new position with our Corporate IT team, where results will matter more than experience.  You will be the critical link between IT and the customer and you will be an asset from Day One in a group where everyone is given the opportunity to grow as fast as they show the ability to do so.  We are looking for a motivated individual with a desire to learn more, and a “get it done” attitude.

• Perform engineering calculations and cost estimates.
• Prepare drawings, layouts, and other engineering drafting.
• Assist in developing plans and reports.
• Assist in collecting data and research utility records.
• Help in design, production, and miscellaneous organizational work.

Our Houston-bsed Project Accounting team is searching for a self-motivated team player with the skills required to provide project accounting to support various groups within the company, where you can contribute to the group’s bottom-line success in this support role. The Project Accountant will have the following responsibilities: 

• Responsible for accurate project set up according to the terms of the executed contract.
• Process monthly billing.
• Responsible for reviewing weekly timesheets and expense reports.
• Responsible for vouchering vendor invoices.
• Works directly with Project Managers to monitor and analyze project financial management through the life cycle of projects.
• Responsible for maintaining accounts receivable including follow up with project managers, clients, and AR Manager.
• Maintain electronic project files.
• Participates in annual peer review audit of project files

In this position, the Designer will work with a team of engineers for the pursuit, design and production of various civil engineering projects, including the following responsibilities:        

• Visualize engineering concepts and translate to design drawings.
• Prepare reports, exhibits, preliminary and final site development drawings, and plan & profiles from verbal instructions, notes, and other input material from supervising engineer.
• Use Civil 3D and Civil 3D supported analysis and modeling software to perform design tasks such as site layouts, site grading, site drainage and utilities, surface modeling and analysis, creation of alignments, creation of corridors, profiles, sections, and material take-offs for cost opinions.
• Assist supervising engineer in collection of project requirements and materials for project design and documentation.
• Able to apply basic engineering design principles, theories, and practices to complete assignments and manage multiple deadlines.
• Assist supervising engineer and management as a technical specialist and advisor to mentor and train graduate engineers, civil designers, and cad technicians.
• Able to conform to company standards.
• Able to organize and maintain project related information per company’s requirements and standards.

We seek well-prepared students from top engineering schools who are interested in expanding their education in civil and water resources engineering through the internship program offered at Walter P Moore. As an engineering intern in our water resources engineering group, you will participate with our project teams on a variety of public water and drainage-related projects, including commercial development assessment and design, hydrologic and hydraulic analyses, FEMA studies, roadway drainage design, flood warning system development, and public infrastructure projects. You will also be eligible to participate in our in-house staff development program.

In this position the qualified individual will work with a team of engineers to provide engineering services on diagnostics related projects, including forensics, restoration, renovation and rehabilitation of commercial structures and complexes such as arenas, stadiums, convention centers, office and industrial facilities, condominiums, hospital complexes, and parking garages. Sound technical background and excellent oral and written communication skills are required.

We are currently looking for Engineers in a veriety of our office locations.  You would be responsible for: 

• Performing structural computations in the design and analysis of concrete, steel or other miscellaneous structures
• Creating analysis models and interpreting results for 2D and 3D structural frames
• Assisting with construction administrative tasks, including site visits and shop drawing review
• Understanding load paths for gravity and lateral loads and calculating applicable loads based on appropriate building codes
• Assisting with design drawings, quantities, cost estimates, specifications, reports and other project deliverables while working with the structures team
• Preparing technical studies and reports            

Walter P Moore has an immediate opening for a Forensics Project Manager to join our dynamic Diagnostics Group. The qualified candidate will have relevant experience acquiring Structural Diagnostics business with either an industrial or commercial structure focus. Project Management experience is required.

Walter P Moore seeks well prepared graduates of top engineering schools to start and build their careers with our firm.

Additional requirements and position responsibilities include:

• Management of land/site development projects, including technical design, quality control, and project management
• Business development activities and assignments concentrated in a specific target area
• Project client interface
• Financial management of projects
• Working with the team to set goals to meet business objectives
• City of Houston and/or Harris County design process experience required

We are in need of a talented Senior Back End Developer to join our Houston, TX based software development team to create and maintain backend services for custom in-house and Azure based applications. The right person for this position will possess a strong can-do attitude and provide exceptional client service while using their analytical, problem-solving and project management skills.